Assembly Guide

Ningbo Bonet Metal Products Co.,Ltd | Updated: Apr 20, 2017

Assembly Guide

The bends, tees, crosses, risers and reducers of wire mesh cable tray can be easily and quickly made live at the project by using a bolt cutter. Since the jaws of the bolt cutter drags a layer of zinc across the cut end and forms a protective layer. When a wire cable tray is cut, the fact that a wire has been cut does not affect the level of protection. Let alone we have rubber caps to protect the cut ends.

The assembly guide below will help the cable tray installer make the bends and others without difficulty even he had never installed wire mesh cable trays before.

WIDTH / TYPE
CUT
FORMING
50mm Bend
50mm bend cut50mm bend forming
100mm & 150mm Bend
100mm&150mm bend cut100mm&150mm bend forming
200mm Bend
200mm bend cut200mm bend forming
300mm Bend
300mm bend cut300mm bend forming
400mm & 450mm Bend
400mm&450mm bend cut400mm&450mm bend forming
500mm Bend
400mm&450mm bend cut400mm&450mm bend cut
600mm Bend
400mm&450mm bend cut400mm&450mm bend cut
90° Bends Assembled From Two Straight Sections
400mm&450mm bend cut400mm&450mm bend cut
Horizontal Angles
400mm&450mm bend cut400mm&450mm bend cut
90° Large Radius Bends
400mm&450mm bend cut400mm&450mm bend cut
Internal Risers
400mm&450mm bend cut400mm&450mm bend cut
External Risers
400mm&450mm bend cut400mm&450mm bend cut
Vertical Inside and Outside Bends
400mm&450mm bend cut400mm&450mm bend cut
Reducers
400mm&450mm bend cut400mm&450mm bend cut
Tees
400mm&450mm bend cut400mm&450mm bend cut
Crosses
400mm&450mm bend cut400mm&450mm bend cut
Assembly Guide - Technical Guide - Ningbo Bonet Metal Products Co.,Ltd
[[NavLink_NewsDetail]]
[[NewsTypeListNav]]

[[TitleNews]]

Ningbo Bonet Metal Products Co.,Ltd | Updated: [[PubDate_NewsDetail]]
[[ContentNews]]
[[PreNextLink_News]]

[[Related News]]

    [[Pre10_News]][[Next10_News]]